home *** CD-ROM | disk | FTP | other *** search
- The Circuit Analysis Program (CAP) is an analysis tool for determing the
- steady-state AC behaviour of electrical/electronic networks.
- The network may contain resistors, capacitors, inductors, controlled cur-
- rent sources (e.g. transistors, op-amps etc.) and independant current sour-
- ces.
-
- CAP was originally issued for the HP85, but has been adapted for the ST
- after a lot of re-writing and testing.
- Although CAP does not have the capabilies of programs like e.g. SPICE, in
- small AC circuit analysis however, the output results are satisfactory and
- in most cases acurate enough to predict the actual circuit behaviour.
-
- Output can be any node voltage, branch voltage, branch current, branch
- power or ratio's thereof.
- Tabulated or plotted outputs are available with linear or logarithmic fre-
- quency sweeps.
-
- CAP is primary intended for electrical engineers or those who are familiar
- with electrical networks and basic electrical/electronic theory.
-
- All files belonging to CAP must be located in folder CAP, including folder
- GUIDE, which contains several help-files.
- Files with the extension CIR are circuit examples, which can be loaded and
- analysed after frequencies and output quantities are selected and calcula-
- tions have been performed.
-
- NOTE: Hardcopy of full screen can be made by ALTERNATE+HELP.
-
- We will offer CAP as a public domain program for non-commercial usage and
- therefore assume no responsibility and shall have no liability, consequen-
- tial or otherwise of any kind arising from the use of this program.
-
-
-
-
- Ger Gruiters
- Laurahof 12
- 5801 JE Venray
- HOLLAND
-
- Tel. 04780-84180
-
-
-